Calibrating The Sensor - Avery Dennison Monarch Freshmarx 9417+ System Administrator Manual

C a l i b r a t i n g t h e S e n s o r
You need to calibrate the sensor if your printer skips labels or prints off the label.
Press
1.
Press Admin.
2.
Enter the Admin password and press
3.
4. Press Maintenance.
Press Calibrate Sensor.
5.
Follow the on-screen instructions to properly load supply for sensor calibration.
6.
(Tools).
(Enter). The default password is 1234.
Performing Maintenance 7-5