Table of Contents
Advertisement
S e l e c t i n g t h e N e t w o r k T i m e S e r v e r
If your printer is connected to a network with Internet access or to a network time server, use
this screen to adjust the settings.
1.
Press
Press Admin.
2.
Enter the Admin password and press
3.
The Admin Tools screen displays your IP address (for LAN connections) or your wireless IP
address.
Press System Settings.
4.
5.
Press Network Settings.
Press Network Time Settings.
6.
Select the check box if you want to automatically synchronize your clock with a Network
7.
Time Server.
8.
To add a new Network Time Server press Add. Use the keypad to enter the server address.
press
(Enter)on the keypad each time you complete a field.
To edit an existing Network Time Server, select the server name from the box then
press Edit. Use the keypad to change the server address as needed.
To remove an existing Network Time server, select the server name from the box then
press Remove.
9.
Adjust the frequency at which your clock synchronizes with the Network Time Server. Use
the + and – buttons to adjust the setting up or down.
10. Press OK when you are finished.
(Tools).
(Enter). The default password is 1234.
Setting Up the Printer 3-13
Advertisement
Table of Contents
