Mitsubishi Electric FDF100VSXVD Technical Manual page 207

Step 3
3. Remove the front panel
(11 pcs of tapping screws).
Pull the panel straightforward so that the panel
doesn't touch the fan blade.
Step 4
4. Remove the fan blade if necessary.
<Note>
Do not rotate the axis of fan motor when removing the
fan blade.
It may cause malfunction of the fan motor.
Step 5
5. Lay down the drain pan heater on the base.
Step 6
6. Put the heater underneath the heat exchanger
and align the end of heater with the end plate
of heat exchanger.
Heater
End of Heater
- 206 -
'11 • PAC-T-160
Heater
End plate of Heat
exchanger