Bosch AMAX panel 2100 Quick Start Manual page 19

AMAX panel
Figure 5.5: AMAX panel configuration – subscriber number
1. Select the item Code manager in the same index sheet.
2. Make sure that the value for the parameter Installer code is the same as currently
programmed in the AMAX panel.
The value is 1234, when firmware of the AMAX panel was upgraded or when the AMAX panel
has factory settings.
Bosch Sicherheitssysteme GmbH
All manuals and user guides at all-guides.com
Quick Start Manual
Programming and Operating the AMAX System | en 19
2015.05 | 05 | F.01U.309.297