Starting Up/Pause/Sleep Mode/Power O; Cleaning Modes - Pure Clean PUCRC95PLUS User Manual

FOR YOUR OWN SAFETY, DO NOT ATTEMPT TO REMOVE THE BATTERY ON
YOUR OWN OR DISPOSE OF IT IN FIRE. DO NOT DISASSEMBLE, CRUSH OR
PUNCTURE THE BATTERY.
Starting Up/ Pause/ Sleep mode/Power o
1. Starting up: Switch on the robot, robot will have 2 beeps and in standby
status, LED indicator will be in gradual blue, press " " button or ON/OFF
button on remote controller, the robot will have 3 beeps and start working.
Note:
a. If robot is in sleep mode, press " " button to wake the robot up from sleep
mode. Then press " " for a second time, the robot starts cleaning automatically.
b. If robot in standby for more than 15 minutes, it can only be wake up by " "
button on robot.
2. Pause: To stop the robot temporarily from cleaning:
A. Press " " button on main body;
B. Or press ON/OFF button on remote controller.
Note: When robot is paused, user can perform new operation.
3. Sleep mode: Turn robot into sleep mode, and its display indicator will be o
(robot in standby, not powered o );
A. The robot will automatically turn to sleep mode if no command received in
60 seconds.
B. Press " " button on the main body for three seconds, robot will turn to
sleep mode.
C. In sleep mode, long press " " button on the main body can wake up the
robot. Press ON/OFF on remote controller can wake up the robot wihtin15
mins before robot in sleep mode.
Note: If the robot is not in use for a long time, please turn the power switch o .
4. Power o : To switch o the robot.

Cleaning modes

1. Auto Cleaning
In this mode, the robot will clean a room
automatically and adjust its cleaning mode
according to the environment.
Note:
In standby mode, press ON/OFF button on remote
controller or " " button on robot to start auto
cleaning.
12
www.PyleUSA.com