Table of Contents
Advertisement
2. Spiral Cleaning
In mode 1, the robot will clean in a spiral way.
In standby mode, press ON/OFF button on remote
controller or " " button on robot to start auto
cleaning and after few seconds, it will start spiral
cleaning mode automatically.
3. Spot Cleaning
Press SPOT on the remote controller to start spot
cleaning.
Note:
A. It is suggested that users could select spot cleaning
mode when robot cleans around the areas with
much dust/dirt.
B. When robot is in standby, press SPOT, robot will clean for around 30s and stop.
C. During robot cleaning, press SPOT, around 30S spot cleaning, robot will turn
to other cleaning mode.
4. Edge Cleaning mode
Switch on the robot, press MODE on the remote
control and select edge cleaning. Under edge
cleaning mode, the robot will do cleaning along
the obstacle by its side brushes.
5. Zig –Zag Cleaning mode
Robot will automatically goes into zig-zag cleaning when it detected it's in an
open area or the environment with less obstacles. Or you can press MODE on
remote control and Select zig-zag cleaning.
Note:
A. After switch on the robot, by press MODE on the remote control, user can
select di erent cleaning modes. And user can press ON/OFF button to stop it.
www.PyleUSA.com
13
Advertisement
Table of Contents
