Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Pure Clean PUCRC25
Summary of Contents for Pure Clean PUCRC25
- Page 1 Mini Robotic Vacuum Cleaner...
-
Page 2: Table Of Contents
TABLE OF CONTENTS SAFETY INSTRUCTIONS * BATTERY AND RECHARGING INSTRUCTIONS PRODUCT FEATURES MAIN BODY AND ACCESSORIES BATTERY INSTALLATION AND REMOVAL RECHARGING BATTERY GENERAL OPERATION * STARTING OPERATION SIDE BRUSH INSTALLATON CLEANING AND MAINTENANCE *CLEANING DUST BIN *CLEANING INTAKE TROUBLESHOOTING www.PyleUSA.com... -
Page 3: Safety Instructions
SAFETY INSTRUCTIONS Read the safety instructions before operating the Mini Robotic Vacuum Cleaner and keep this manual handy for your future reference. Observe the basic safety rules to prevent any occurrence of fire, electric shock or personal injury. 1. Do not operate the Mini Robotic Vacuum Cleaner outdoors. 2. -
Page 4: Battery And Recharging Instructions
NOTE: Take out or remove the packing foam from behind the front bumper before using the Mini Robotic Vacuum Cleaner. BATTERY AND RECHARGING INSTRUCTIONS 1. The battery is rechargeable. Please use the voltage and current specified on the packing. If you are not sure of the voltage and current of your house, please contact the seller or local power company of a licensed electrician. -
Page 5: Main Body And Accessories
MAIN BODY AND ACCESSORIES Main Body x 1 Rechargeable Battery x 1 Adapter x 1 Filter x 1 User Manual x 1 Side brush x 2 MAIN BODY AND ACCESSORIES Bumper Inner Dustbin Top Cover Switch ON/OFF www.PyleUSA.com... -
Page 6: Battery Installation And Removal
Front Wheel Bumper Side Brush Anti Drop Sensor Vacuum Intake Wheel Battery House BATTERY INSTALLATION AND REMOVAL 1. Before installing or removing the battery, disconnect the product from the power source. 2. Open the battery cover. 3. Insert the battery into the battery cabinet and close the cover. Make sure the cover clicks securely into its position. -
Page 7: Recharging Battery
RECHARGING BATTERY 1. Before charging, make sure the battery is correctly installed. 2. To charge the product, connect the adapter output into the DC jack, then plug the output into a wall outlet. A blue light will flash when charging. 3. -
Page 8: General Operation
GENERAL OPERATION Starting Operation 1. Place the product in a room with a lot of free space, then power it on. 2. When the product runs out of power, the LED indicator in the illumination ring will turn red and the product will stop working. Note: *This product is not suitable for long-pile carpets. -
Page 9: Cleaning And Maintenance
CLEANING AND MAINTENANCE Cleaning Dust Bin 1. Open the upper cover by lifting the lid near the power on/o button 2. Put your nger into the dust bin groove and grip to take it out www.PyleUSA.com... - Page 10 3. Open the lid of dust bin. 4. Take out the inner lter. 5. Empty the dirt in the dust bin. www.PyleUSA.com...
- Page 11 6. Rinse the dust bin with tap water. Do not wash it in washing machine, dish washer or other machine. 7. Periodically clean the filter with a soft bristled brush. 8. Reinstall the filter and the dust bin lid when fully dry. 9.
-
Page 12: Cleaning Intake
Cleaning Intake With use over time, dirt and dust may accumulate around the intake of the product. For best cleaning results and efficiency, the intake should be cleaned periodically. 1. Remove the external power source. 2. Clean the dirt and dust at the intake www.PyleUSA.com... -
Page 13: Troubleshooting
TROUBLESHOOTING PROBLEM POSSIBLE CAUSE SOLUTION 1. Recharge the battery 1. The battery is low Red LED light stays 2. Ensure that the 2. The main body is on after product is vacuum is on a flat elevated from the floor powered on surface of the floor 1. - Page 14 Questions? Issues? We are here to help! Phone: (1) 718-535-1800 Email: support@pyleusa.com...