Page 2
Please read this User Manual carefully before using and keep it properly for future use. About Your PUCRC50 Robot Vacuum Cleaner • 1. TOP VIEW Dust box cover Start/Stop On/O Bumper Drive wheel Side Brush 2. BOTTOM VIEW Battery Box...
Maintenance • 1. Clean or replace the side brush Remove side brush screw Take o side brush The side brushes can sometimes be deformed during transportation or when the product is used under particular conditions. If this happens, it is possible to return to the original shape by putting bristles in hot water.
Page 4
A. Push out the cover and clean lter B. Clean or replace lter 3. Remove or Install Battery Using the PUCRC50 Robot Vacuum Cleaner • 1. Water Tank Use and Mopping (Optional Model) For wet mopping, please mount the water tank and mopping cloth before use.
A: It might be stopped because of low power, or stuck by obstacles, or by carpet with long rugs, or moves onto carpet when cleaning with water PUCRC50 tank and mop attached. is not supposed to clean carpet with long rugs, or when with water tank attached.
Cleans Multiple Floors • Robot Vacuum Cleaner • The works on wood, carpet, tile, vinyl, and linoleum, and adjusts automatically to di erent oor types. It mops hard oor with water tank, but doesn’t mop carpet with long rugs. Robot Vacuum Cleaner •...
Page 7
• Small children and pets must be supervised while the cleaner is cleaning. • Use only the original charger supplied with the appliance. Check that your supply voltage is the same as that stated on the charger. • Leaks from battery cells can occure under extreme usage or temperature conditions.
Page 8
TROUBLESHOOTING • Problems Causes and Solutions The robot cleaner doesn’t work Check that the robot cleaner is switched on. Check the dust container, lter and motor are clean or not. Check if the robot cleaner needs to be charged. Turn power o and: Cleaning power is weak Empty dust container.
Need help?
Do you have a question about the PUCRC50 and is the answer not in the manual?
Questions and answers