Battery Removal - Pure Clean PUCRC95PLUS User Manual

Automatic robot cleaning vacuum
Table of Contents

Advertisement

e. When rst using, please run out of the power, and charge the robot asap.
f. In the working status, the robot will return to charging station automatically
when battery power is low.
Note: Please keep the charge station in charging, or else the robot can not nd
the charge station to charge automatically.
For extending battery life:
a. Before rst use, charge the robot for 12 hours.
b. Charge the robot as soon as battery power is low.
c. The robot will return to charging station automatically when it nishes cleaning
or battery power is low.
d. If the robot is not to be used for a long time, fully charge the battery, turn the
power o , remove and store it in a cool, dry place.
e. If the robot is not to be used for more than 3 months, charge the robot for 12
hours before working.

Battery Removal

1. Remove the screws on battery cover with a screw driver.
2. Remove the battery cover.
3. Grasp the insulating tape at two sides of the battery and lift the battery.
4. Unplug the wire connector that links the battery and robot.
Correct disposal of batteries in this product
(Applicable in countries with separate battery return systems.)
The marking on the battery, manual or packaging indicates that
the battery in this product should not be disposed of with other
household waste. Where marked, the chemical symbols Hg, Cd or
Pb indicate that the battery contains mercury, cadmium or lead
above the reference levels in EC Directive 2006/66.
The battery incorporated in this product is not user replaceable. For information
on its replacement, please contact your service provider. Do not attempt to
remove the battery or dispose it in a re. Do not disassemble, crush, or puncture
the battery. If you intend to discard the product, the waste collection site will
take the appropriate measures for the recycling and treatment of the product,
including the battery
Warnings about battery
You must not remove (or attempt to remove) the battery incorporated in
this product on your own. To replace the battery, you must contact your
service provider or an independent quali ed professional.
These instructions have been prepared for the exclusive use of your service
provider or independent quali ed professional.
www.PyleUSA.com
11

Advertisement

Table of Contents
loading

Table of Contents