Table of Contents
Advertisement
Charging Station
Signal receiver
Infrared signal
transmitting widow
Power supply socket
Display Panel
A. Switch on the robot, robot will have 2 beeps, and in standby status the LED
indicator will be in gradual blue.
B. Press " " button again, robot will have 3 beeps and the indicator will ash in
blue, then it will start cleaning. And the indicator will keep in blue during
cleaning.
C. If the robot is malfunctioned, its indicator will be in di erent status
(details please take reference in troubleshooting).
D. The indicator will ash in red when the robot has low power.
E. During charging (robot on charging home base or connected by charging
adaptor), " " button indicator will get red gradually. After fully charged, the
robot will have 5 beeps and " " button indicator will turn blue.
Product Operation
SCHEDULING
You can schedule the robot to make it start cleaning automatically at a
certain time everyday.
1. The robot can only be set when it's in standby or charging on the docking
station. (If the robot is in cleaning, pause it before scheduling. If the robot
is in sleep mode, long press CLEAN button on main body or ON/OFF on
remote controller to wake it up. If the robot is in deep sleep-power o ,
long press CLEAN button on main body to wake it up.)
8
www.PyleUSA.com
Power light
Top cover
Charging poles
Press Button
Advertisement
Table of Contents
