Starting Up/Standby/Sleep Mode/Power Off - Pure Clean PUCRC95 User Manual

PRODUCT OPERATION
STARTING UP / STANDBY / SLEEP MODE / POWER OFF
1. STARTING UP
A. Power on the robot by turning on the power switch at the right side of
machine. Press CLEAN button or ON/OFF on remote, robot will beep
twice and enter in standby status, CLEAN indicator light will ash blue
gradually.
B. In standby, press CLEAN button on main body or ON/OFF on remote to
start cleaning. The robot will beep three times, and the LED indicator will
ash blue quickly, if its function is normal, robot will start cleaning, LED
indicator will stay blue during cleaning.
Note:
1. If robot is in Sleep mode, long press CLEAN button for 3 seconds on main
body or ON/OFF on remote to wake up the robot to standby status rstly.
2. If robot goes into deep sleep (powered o after 15minites not working),
long press CLEAN button for 3 seconds to wake it up to standby status
rstly.
2. STANDBY
The robot is waiting for the user's operation with power switched on.
Through one of the following methods, you can change into standby mode:
A. During the cleaning process, press CLEAN button on main body to enter
standby mode.
B. During the cleaning process, press the ON/OFF on remote controller to
pause the robot.
Note: When robot is paused, user can perform new operation.
3. SLEEP MODE
Turn robot into sleep mode, its display indicator will be in dark (robot is not
powered o );
A. Robot will automatically enter into sleep mode and beep once if no
command is received for more than 60 seconds.
B. Long press CLEAN button on the main body for 3 seconds, robot will beep
once and enter into sleep mode.
C. You can long press CLEAN button for 3 seconds on main body or ON/OFF
on remote to wake up the robot to standby status.
4. POWER OFF
By either of the following methods, you can power o the robot:
A. In standby mode, turn o the power switch at the right side of machine.
B. In sleep mode, the robot will automatically power o if there is no
operation within 15 minutes, it can only be woken up by CLEAN button on
robot, long press CLEAN button on main body for 3 seconds to wake up
the robot to standby status.
Note:
If the robot is not in use for a long time, please turn the power switch o .
www.PyleUSA.com
9