Measurement Settings - UPRtek PG200N User Manual

4.1 Measurement Settings

In mode of "BASIC", "SPECTRUM", "PPFD", "PPFD SPECTRUM",
"CIE", "GRID", "COMPARE" you can press the "
button at the bottom of the screen to perform detailed settings.
Back to
measurement page
35
" setting
Next Previous
page page
4.1 Measurement Settings
■ Keyboard ■ Save format
This option is turned on can You may opt to save
be file naming when you measurement data of
saving measured data. Excel file only or both
Excel and JPG files.
■ Decimal speparator ■ Reset grid
Select dot/comma to set This function will only be
the decimal separator of displayed under GRID mode.
the measurement data.
About auto save:
Measurements are auto saved (Excel + JPG) in case this operation
1.
is set on. In case there is no SD card inserted when measurement
is running, this product prompts warning messages while keep on
measuring.
Measurements are saved only by clicking Save icon in case this
2.
operation is set off.
■ Auto save
Opt to select auto save
measurements or not.
■ Compare mode
This function will only be
displayed under COMPARE
mode.
36