UPRtek PG200N User Manual page 7

2.1 Preparing Before Use
Dark calibration
1 Press the power button and the blue indicator will light
up, and the boot screen will appear on the screen.
2 Perform dark calibration by following the steps displayed
on the screen. When the "Dark calibration" dialog
window appears, select the "
Confirm that the cap is covered and then select the "
3
OK button.
Once the message "Dark calibration finished" appears,
click " "OK and you will be returned to the main menu.

09
Precautions on optical
sensor installation
Make sure the optical
sensor latch is well
connected to console.
3
" OK button.

"

4
2.1 Preparing Before Use
Set up date and time
Set up date and time before taking any measurements.
1 Click "OPTION" icon.
2
Press "Date" and "Time"
to supdate settings.
3 Once date is set, press " "

Yes to exit to setup option
page.
4 Once time is set, press " "

Yes to exit to setup option
page.
10