Compare Mode - UPRtek PG200N User Manual

3.7 GRID Mode
Reset the Grid data
1
Press the "Settings" button at
the bottom of the screen.
3
Press "OK" Yes to reset the
grid data.
27
2
Enter the measurement setting
screen and press the "Reset
grid" item.
4
Return to the measurement
page and the grid data is reset.

3.8 COMPARE Mode

The Compare item allows you to compare two measurements
side by side. You can compare two consecutive measurements
or compare a measurement against historical data (SD card).
BASIC
PPFD
When you press the COMPARE
icon (on Home Screen), the
COMPARE Menu will display,
which is similar to the Home
Screen. You can tap any of
the icons depending on what
type of data you want to
compare.
1. The examples in the following pages only describe how to compare
data in the BASIC screens, - comparing SPECTRUM, PPFD, PPFD
SPECTRUM data are similar.
SPECTRUM
PPFD
SPECTRUM
28