UPRtek PG200N User Manual page 8

2.2 Basic Measurement
Measurement
Click "BASIC" mode to
enter measurement page.
1 Point optical sensor to light source to be tested.
2
Press the measurement button at the bottom
center of the LCD screen or the measurement
key on the left hand side of the spectrometer to
take a measurement (You can press measurement
key at both sides).
11
3
This product beeps once after
measurement is done and
displays results on screen.
2.2 Basic Measurement
Save measurement data
1
Press the "Save file" button at
lower right corner.
EXCEL file name：
ESPDY Y Y Y _ M M D D _ H H M M S S
.xls
regular
3
▲ You may save entire source data.
JPG file name：
I MG Y Y Y Y _ M M D D _ H H M M S S
.JPG
regular
Measurement data is
now saved in the MicroSD
card. You may note down
file name if necessary.
▲
You may save measurement screen in "BASIC mode",
"SPECTRUM mode", "PPFD mode", "PPFD SPECTRUM
mode" and "CIE 1931.1976 mode".
2
( year ) (month)(day) (hour/min/seconds)
( year ) (month)(day) (hour/min/seconds)
12