Virtual Servers - LevelOne WBR-2400TX User Manual

22mbps wireless ap router w/ 4-port switch
Table of Contents

Advertisement

Virtual Servers

This feature allows you to make Servers on your LAN accessible to Internet users. Normally,
Internet users would not be able to access a server on your LAN because:
Your Server does not have a valid external IP Address.
Attempts to connect to devices on your LAN are blocked by the firewall in this device.
The "Virtual Server" feature solves these problems and allows Internet users to connect to your
servers, as illustrated below.
Web Serve r
(192.168.0.10)
Remote PC
Using Web Ser ver
(ht tp://203.70 .212.52)
IP Address seen by Internet Users
Note that, in this illustration, both Internet users are connecting to the same IP Address, but
using different protocols.
To Internet users, all virtual Servers on your LAN have the same IP Address.
This IP Address is allocated by your ISP.
This address should be static, rather than dynamic, to make it easier for Internet users to
connect to your Servers.
However, you can use the DDNS (Dynamic DNS) feature to allow users to connect to your
Virtual Servers using a URL, instead of an IP Address.
192.168.0.1
(LAN IP Ad dress )
Wireless
Router
203.70.212.52
(Internet IP Address)
Internet
Figure 31: Virtual Servers
FTP Server
(192.168 .0.20)
Re mote PC
Using FTP Serv er
(ftp://203.70.212.52 )
Advanced Features
49

Advertisement

Table of Contents
loading

Table of Contents