Configuration Program - LevelOne WBR-2400TX User Manual

Configuration Program

The LevelOne 22Mbps Wireless AP Router contains an HTTP server. This enables you to
connect to it, and configure it, using your Web Browser. Your Browser must support
JavaScript. The configuration program has been tested on the following browsers:
•
Netscape V4.08 or later
•
Internet Explorer V4 or later
Preparation
Before attempting to configure the LevelOne 22Mbps Wireless AP Router, please ensure that:
•
Your PC can establish a physical connection to the LevelOne 22Mbps Wireless AP
Router. The PC and the `be directly connected (using the Hub ports on the LevelOne
22Mbps Wireless AP Router) or on the same LAN segment.
•
The LevelOne 22Mbps Wireless AP Router must be installed and powered ON.
•
If the LevelOne 22Mbps Wireless AP Router's default IP Address (192.168.0.1) is already
used by another device, the other device must be turned OFF until the LevelOne 22Mbps
Wireless AP Router is allocated a new IP Address during configuration.
Using UPnP
If your Windows system supports UPnP, an icon for the LevelOne 22Mbps Wireless AP
Router will appear in the system tray, notifying you that a new network device has been found,
and offering to create a new desktop shortcut to the newly-discovered device.
•
Unless you intend to change the IP Address of the LevelOne 22Mbps Wireless AP Router,
you can accept the desktop shortcut.
•
Whether you accept the desktop shortcut or not, you can always find UPnP devices in My
Network Places (previously called Network Neighborhood).
•
Double - click the icon for the LevelOne 22Mbps Wireless AP Router (either on the
Desktop, or in My Network Places) to start the configuration. Refer to the following sec-
tion Setup Wizard for details of the initial configuration process.
Using your Web Browser
To establish a connection from your PC to the LevelOne 22Mbps Wireless AP Router:
1. After installing the LevelOne 22Mbps Wireless AP Router in your LAN, start your PC. If
your PC is already running, restart it.
2. Start your WEB browser.
3. In the Address box, enter "HTTP://" and the IP Address of the LevelOne 22Mbps Wireless
AP Router, as in this example, which uses the LevelOne 22Mbps Wireless AP Router's
default IP Address:
HTTP://192.168.0.1
Setup
9