LevelOne WBR-2400TX User Manual page 39

LevelOne 22Mbps Wireless AP Router User Guide
Data - Status Screen
Internet
Connection Method
Internet IP Address
Connection Status
"Connection Details"
Button
"Access Log"
Button
LAN
IP Address
Network Mask
DHCP Server
System
Device Name
Firmware Version
"System Data"
Button
Buttons
Connection Details
This indicates the current connection method, as set in the Setup
Wizard.
This IP Address is allocated by the ISP (Internet Service Pro-
vider).
Current connection status:
•
OK
•
No connection
•
Error
If there is an error, you can click the "Connection Details" button
to find out more information.
Click this button to open a sub-window and view a detailed
description of the current connection. Depending on the type of
connection, a "log" may also be available.
Click this button to open a sub-window and view details of
outgoing connections to the Internet. The log contains the follow-
ing data:
•
Source IP Address - The IP Address of the local PC re-
questing the Internet connection.
•
Destination - The Internet address which was requested. If
the URL Filter is enabled, this address will be shown as a
URL. Otherwise, the IP address will be displayed.
•
Blocked - If the request was blocked by the URL Filter
function, this will display "Yes". Otherwise, it will be blank.
The IP Address of the LevelOne 22Mbps Wireless AP Router.
The Network Mask (Subnet Mask) for the IP Address above.
This shows the status of the DHCP Server function - either
"Enabled" or "Disabled".
For additional information about the PCs on your LAN, and the
IP addresses allocated to them, use the PC Database option on
the Advanced menu.
This displays the current name of the LevelOne 22Mbps Wireless
AP Router.
The current version of the firmware installed in the LevelOne
22Mbps Wireless AP Router.
Clicking this button will open a Window which lists all system
details and settings.
View the details of the current Internet connection. The sub-
screen displayed will depend on the connection method used. See
36