Table of Contents
Advertisement
Default Gateway
DNS IP Address
DHCP Client
Buttons
Release/Renew
Button will display
EITHER
"Release"
OR
"Renew"
Refresh
The IP Address of the remote Gateway or Router associated with the
IP Address above.
The IP Address of the Domain Name Server which is currently used.
This will show "Enabled" or "Disabled", depending on whether or
not this device is functioning as a DHCP client.
If "Enabled" the "Remaining lease time" field indicates when the IP
Address allocated by the DHCP Server will expire. The lease is
automatically renewed on expiry; use the "Renew" button if you wish
to manually renew the lease immediately.
This button is only useful if the IP address shown above is allocated
automatically on connection. (Dynamic IP address). Otherwise, it has
no effect.
•
If the ISP's DHCP Server has NOT allocated an IP Address for
the LevelOne 22Mbps Wireless AP Router, this button will say
"Renew". Clicking the "Renew" button will attempt to re-
establish the connection and obtain an IP Address from the ISP's
DHCP Server.
•
If an IP Address has been allocated to the LevelOne 22Mbps
Wireless AP Router (by the ISP's DHCP Server), this button will
say "Release". Clicking the "Release" button will break the con-
nection and release the IP Address.
Update the data shown on screen.
Operation and Status
41
Advertisement
Table of Contents
