LevelOne WBR-2400TX User Manual page 20

WEP data
encryption
Access Point
Allow LAN
access by ...
Allow Internet
access by ...
Buttons
Configure WEP
Select Stations
Save
Cancel
•
WEP (Wired Equivalent Privacy) status will display "Enabled" or
"Disabled", depending on whether WEP is being used. If used,
data is Encrypted before being transmitted, making communica-
tion more secure.
•
Click the "Configure WEP" button to access the WEP sub-screen,
and view or change the WEP settings.
•
All Wireless Stations - All wireless stations can use the access
point to access your LAN.
•
Selected Wireless stations only - Only selected wireless stations
access your LAN. To select the required wireless stations, click
the "Select Stations" button.
•
All Wireless Stations - All wireless stations can use the access
point to access the Internet.
•
Selected Wireless stations only - Only selected wireless stations
use the access point to access the Internet. To select the required
wireless stations, click the "Select Stations" button.
Click this button to view the WEP sub-screen. See the following
section for more details.
Click this button to select the required PCs.
Save the data on screen.
The "Cancel" button will discard any data you have entered since the
last "Save" operation.
Setup
17