Table of Contents
Advertisement
Setup Wizard
The first time you connect to the LevelOne 22Mbps Wireless AP Router, the Setup Wizard
will run automatically. (The Setup Wizard will also run if the LevelOne 22Mbps Wireless AP
Router's default setting are restored.)
1. Step through the Wizard until finished.
•
You need to know the type of Internet connection service used by your ISP. Check
the data supplied by your ISP.
•
The common connection types are explained in the tables below.
2. On the final screen of the Wizard, run the test and check that an Internet connection can be
established.
•
If the connection fails, check your data, the Cable/DSL modem, and all connections.
•
If your ISP has recorded your MAC (hardware) address, exit the Wizard and select
MAC Address on the Advanced menu. Change the MAC address to match the value
expected by your ISP.
Cable Modems
Type
Dynamic
IP Address
Static (Fixed)
IP Address
@Home type
service.
DSL Modems
Type
Dynamic
IP Address
Static (Fixed)
IP Address
PPPoE
Details
Your IP Address is allocated
automatically, when you
connect to you ISP.
Your ISP allocates a perma-
nent IP Address to you.
The IP Address is allocated
automatically, but a "Host
Name" and "Domain Name"
are allocated to you. Some-
times, the ISP will record the
MAC (Hardware) address of
your PC.
Details
Your IP Address is allocated
automatically, when you
connect to you ISP.
Your ISP allocates a perma-
nent IP Address to you.
You connect to the ISP only
when required. The IP address
is usually allocated automati-
cally.
ISP Data required
Usually, none.
However, some ISP's may
require you to use a particular
Hostname, Domain name, or
MAC (physical) address.
IP Address allocated to you.
Some ISP's may also require
you to use a particular Host-
name, Domain name, or MAC
(physical) address.
Host Name and Domain Name;
sometimes the MAC (hardware)
address.
ISP Data required
None.
IP Address allocated to you.
User name and password.
Setup
11
Advertisement
Table of Contents
