LevelOne WBR-2400TX User Manual page 65

LevelOne 22Mbps Wireless AP Router User Guide
Add
Update
Delete
Clear Form
Generate Report
Configuring Other Routers on your LAN
It is essential that all IP packets for devices not on the local LAN be passed to the LevelOne
22Mbps Wireless AP Router, so that they can be forwarded to the external LAN, WAN, or
Internet. To achieve this, the local LAN must be configured to use the LevelOne 22Mbps
Wireless AP Router as the Default Route or Default Gateway.
Local Router
The local router is the Router installed on the same LAN segment as the LevelOne 22Mbps
Wireless AP Router. This router requires that the Default Route is the LevelOne 22Mbps
Wireless AP Router itself. Typically, routers have a special entry for the Default Route. It
should be configured as follows.
Destination IP Address
Network Mask
Gateway IP Address
Metric
Other Routers on the Local LAN
Other routers on the local LAN must use the LevelOne 22Mbps Wireless AP Router's Local
Router as the Default Route. The entries will be the same as the LevelOne 22Mbps Wireless
AP Router's local router, with the exception of the Gateway IP Address.
•
For a router with a direct connection to the LevelOne 22Mbps Wireless AP Router's local
Router, the Gateway IP Address is the address of the LevelOne 22Mbps Wireless AP
Router's local router.
•
For routers which must forward packets to another router before reaching the LevelOne
22Mbps Wireless AP Router's local router, the Gateway IP Address is the address of the
intermediate router.
Add a new entry to the Static Routing table, using the data shown in
the "Properties" area on screen. The entry selected in the list is
ignored, and has no effect.
Update the current Static Routing Table entry, using the data shown
in the "Properties" area on screen.
Delete the current Static Routing Table entry.
Clear all data from the "Properties" area, ready for input of a new
entry for the Static Routing table.
Generate a read-only list of all entries in the Static Routing table.
Normally 0.0.0.0, but check your router documentation.
Normally 0.0.0.0, but check your router documentation.
The IP Address of the LevelOne 22Mbps Wireless AP
Router.
1
62