Table of Contents
Advertisement
LevelOne 22Mbps Wireless AP Router User Guide
Physical Details
Front Panel
Status (Red)
On - Error condition.
LED
Off - Normal operation.
Blinking - This LED blinks during start up.
Power LED
On - Power on.
Off - No power.
LAN LEDs
For each port, there are 2 LEDs
•
•
WAN LED
On - Connection to the Broadband Modem attached to the WAN (Inter-
net) port is established.
Off - No connection to the Broadband Modem.
WLAN LED
On - Idle.
Off - Error - No Wireless connection available.
Flashing - Data is being transmitted or received via the Wireless access
point. This includes "network traffic" as well as user data.
Figure 2: Front Panel
Link/Act
•
On - Corresponding LAN (hub) port is active.
•
Off - No active connection on the corresponding LAN (hub) port.
•
Flashing - Data is being transmitted or received via the corre-
sponding LAN (hub) port.
100
•
On - Corresponding LAN (hub) port is using 100BaseT.
•
Off - Corresponding LAN (hub) port connection is using
10BaseT, or no active connection.
4
Advertisement
Table of Contents
