3.2 Main Functions
To select any functions, press the MENU button until the required one is shown on the display.
Select the function by the ENTER button and the display will blink. Use the DOWN and UP button
to change the mode. Once the required mode has been selected, press the ENTER button to setup
or it will automatically return to the main functions without any change after idling one minute.
Back to the functions without any change press the MENU button.
The main functions are shown below:
BW-903 CW AR / BW-903 WW AR:
7E
Need help?
Do you have a question about the Building wash and is the answer not in the manual?