H3C S5590-HI Series Hardware Information

H3C S5590-HI Series Hardware Information

Hide thumbs Also See for S5590-HI Series:

Advertisement

H3C S5590-HI[EI] Switch Series
Hardware Information and Specifications
New H3C Technologies Co., Ltd.
http://www.h3c.com
Document version: 6W102-20240725

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the S5590-HI Series and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for H3C S5590-HI Series

  • Page 1 H3C S5590-HI[EI] Switch Series Hardware Information and Specifications New H3C Technologies Co., Ltd. http://www.h3c.com Document version: 6W102-20240725...
  • Page 2 The information in this document is subject to change without notice. All contents in this document, including statements, information, and recommendations, are believed to be accurate, but they are presented without warranty of any kind, express or implied. H3C shall not be liable for technical or editorial errors or omissions contained herein.
  • Page 3 Preface H3C S5590-HI[EI] Switch Series Hardware Information and Specifications describes product models, technical specifications, ports,and LEDs of the S5590-HI[EI] switches. This preface includes the following topics about the documentation: • Audience. • Conventions. • Documentation feedback. Audience This documentation is intended for: •...
  • Page 4 Symbols Convention Description An alert that calls attention to important information that if not understood or followed WARNING! can result in personal injury. An alert that calls attention to important information that if not understood or followed CAUTION: can result in data loss, data corruption, or damage to hardware or software. An alert that calls attention to essential information.
  • Page 5 Documentation feedback You can e-mail your comments about product documentation to info@h3c.com. We appreciate your comments.
  • Page 6: Table Of Contents

    Contents 1 Product models and technical specifications ············································ 1-3 Product models ··············································································································································· 1-3 Technical specifications ·································································································································· 1-4 S5590-HI switch series ··························································································································· 1-4 S5590-EI switch series ···························································································································· 1-8 2 Chassis views ························································································ 2-25 S5590-HI switch series ························································································································· 2-25 S5590-EI switch series ·························································································································· 2-29 3 Removable components and compatibility matrixes ······························...
  • Page 7 SFP port LED ········································································································································ 7-75 SFP+ port LED ······································································································································ 7-76 SFP28 port LED ···································································································································· 7-76 QSFP+ port LED ··································································································································· 7-76 QSFP28 port LED ································································································································· 7-77 10/100/1000BASE-T autosensing Ethernet port LED ··········································································· 7-77 10G/5G/2.5G/1000BASE autosensing Ethernet port LED ···································································· 7-77 Expansion card status LED ··················································································································· 7-78 Fan tray status LED on a fan tray ·········································································································...
  • Page 8: Product Models And Technical Specifications

    Product models and technical specifications Unless otherwise stated, interface modules and interface cards are used interchangeably in this document. Product models Table1-1 Switch series and models Switch series Model Product code (PID) S5590-28T8XC-HI LS-5590-28T8XC-HI S5590-48T4XC-HI LS-5590-48T4XC-HI S5590-HI switch Non-PoE models series S5590-28S8XC-HI LS-5590-28S8XC-HI...
  • Page 9: Technical Specifications

    You can view the PID of a switch on the label located on its rear panel or top panel. • To obtain the purchase information, see the product data sheet at https://www.h3c.com/en/Products_and_Solutions/InterConnect/Switches/ and pay attention to the switch product lifecycle management announcement at https://www.h3c.com/en/Support/Policy_Dynamics/Management_Strategy/Products_End_of_Lif...
  • Page 10 S5590-28T8XC-H S5590-48T4XC-H S5590-28S8XC-H S5590-48S4XC-H Item SFP+ port 28 (The four 48 (The four 4 (Each and its highest-numbered highest-numbered corresponding SFP ports and their SFP ports cannot be 10/100/1000BASE- corresponding SFP port used when the port T autosensing 10/100/1000BASE- rate mode of the Ethernet port form a T autosensing expansion slots is...
  • Page 11 S5590-28T8XC-H S5590-48T4XC-H S5590-28S8XC-H S5590-48S4XC-H Item standard: fully configured with copper cables or network cables, at 30% load Power consumption (full load) Data collection Single power input: Single power input: Single power input: Single power input: standard: fully 136 W 132 W 138 W 152 W configured...
  • Page 12 S5590-28T8XC-H S5590-48T4XC-H S5590-28S8XC-H S5590-48S4XC-H Item Heat dissipation Heat dissipation Air cooling method Ventilation Front-to-rear or rear-to-front airflow, determined by the selected fan tray model aisle Reliability and availability Power supply redundancy Fan tray You must install two fan trays on the switch. redundancy Power supplies and fan trays support hot swapping.
  • Page 13: S5590-Ei Switch Series

    S5590-EI switch series Table1-3 Technical specifications for non-PoE switch models (1) S5590-28T8XC-E S5590-28T8XC-E S5590-48T4XC-E S5590-48T4XC-E Item (LS-5590-28T8X (LS-5590-28T8X (LS-5590-48T4X (LS-5590-48T4X C-EI/LS-5590-28 C-EI-GL/LS-5590 C-EI/LS-5590-48 C-EI-GL/LS-5590 T8XC-EI-G3) -28T8XC-EI-H3) T4XC-EI-G3) -48T4XC-EI-H3) Physical specifications Dimensions 44 × 440 × 360 mm (1.73 × 17.32 × 14.17 in) (H ×...
  • Page 14 AC input, DC input Note: Power input The S5590-EI switch series does not support HVDC input. For DC input, you can use a –48 VDC power source in the equipment room or an RPS (H3C RPS1600-A). Power "Removable power supplies" specifications...
  • Page 15 S5590-28T8XC-E S5590-28T8XC-E S5590-48T4XC-E S5590-48T4XC-E Item (LS-5590-28T8X (LS-5590-28T8X (LS-5590-48T4X (LS-5590-48T4X C-EI/LS-5590-28 C-EI-GL/LS-5590 C-EI/LS-5590-48 C-EI-GL/LS-5590 T8XC-EI-G3) -28T8XC-EI-H3) T4XC-EI-G3) -48T4XC-EI-H3) configured with transceiver modules or network cables, at 100% load Thermal consumption Thermal consumption Single power input: Single power input: (static) 129 BTU/h 139 BTU/h Data Dual power inputs:...
  • Page 16 S5590-28T8XC-E S5590-28T8XC-E S5590-48T4XC-E S5590-48T4XC-E Item (LS-5590-28T8X (LS-5590-28T8X (LS-5590-48T4X (LS-5590-48T4X C-EI/LS-5590-28 C-EI-GL/LS-5590 C-EI/LS-5590-48 C-EI-GL/LS-5590 T8XC-EI-G3) -28T8XC-EI-H3) T4XC-EI-G3) -48T4XC-EI-H3) Fan tray You must install two fan trays on the switch. redundancy Power supplies and fan trays support hot swapping. Hot swapping Expansion cards support hot swapping, but do not hot swap an expansion card when the switch is starting up Mean Time Between...
  • Page 17 S5590-28S8XC-E S5590-48S4XC-E S5590-24X4YC-E S5590-48TS4X2 Item (LS-5590-28S8X (LS-5590-48S4X QC-EI C-EI-GL/LS-5590 C-EI-GL/LS-5590 -28S8XC-EI) -48S4XC-EI) (H × W × D, (4.92 × 22.83 × (4.92 × 22.83 × I-GL: 125 × 580 × I-GL: 125 × 580 × 22.13 in) 22.13 in) with package 562 mm (4.92 ×...
  • Page 18 AC input, DC input Note: Power input The S5590-EI switch series does not support HVDC input. For DC input, you can use a –48 VDC power source in the equipment room or an RPS (H3C RPS1600-A). Power "Removable power supplies" specifications...
  • Page 19 S5590-28S8XC-E S5590-48S4XC-E S5590-24X4YC-E S5590-48TS4X2 Item (LS-5590-28S8X (LS-5590-48S4X QC-EI C-EI-GL/LS-5590 C-EI-GL/LS-5590 -28S8XC-EI) -48S4XC-EI) 100% load Thermal consumption Thermal consumption Single power input: Single power input: (static) 133 BTU/h 143 BTU/h Data Dual power inputs: Dual power inputs: collection 156 BTU/h 167 BTU/h standard: no load Thermal...
  • Page 20 S5590-28S8XC-E S5590-48S4XC-E S5590-24X4YC-E S5590-48TS4X2 Item (LS-5590-28S8X (LS-5590-48S4X QC-EI C-EI-GL/LS-5590 C-EI-GL/LS-5590 -28S8XC-EI) -48S4XC-EI) Mean Time Between 238.58 162.05 101.74 101.01 Failure (MTBF) (year) Mean time to repair (MTTR) (hour) Availability 99.999898% 99.999885% Environment specifications Sound pressure level 40.9 dB 40.9 dB 46.6 dB 47.4 dB at 27°C...
  • Page 21 Item S5590-28P8XC-EI S5590-48P6XC-EI Technical specifications Memory 2 GB (RAM) Flash 4 GB Port types and quantity Console port 1 × serial console port USB port Management Ethernet port SFP+ port 4 (Each and its corresponding SFP port 10/100/1000BASE-T autosensing Ethernet port form a combo interface.) 10/100/1000B 28 (The four highest-numbered...
  • Page 22 Item S5590-28P8XC-EI S5590-48P6XC-EI Power consumption Power consumption (static) Single power input: 48 W Single power input: 52 W Data Dual power inputs: 53 W Dual power inputs: 59 W collection standard: no load Power consumption (typical) Data collection Single power input: 48 W Single power input: 73 W standard: fully configured...
  • Page 23 Item S5590-28P8XC-EI S5590-48P6XC-EI (full load) Dual power inputs: 3569 BTU/h Dual power inputs: 5956 BTU/h Data collection standard: fully configured with transceiver modules or network cables, at 100% load Heat dissipation Heat dissipation Air cooling method Ventilation Front-to-rear or rear-to-front airflow, determined by the selected fan tray model aisle Reliability and availability Power supply...
  • Page 24 Item S5590-28P8XC-EI S5590-48P6XC-EI Compliance • Safety standards Product • EMC standards compliance • Environmental and eco-friendly standards Table1-6 Technical specifications for PoE switch models (2) Item S5590-24UXM4YC-EI S5590-48UXM4YC-EI Physical specifications Dimensions 44 × 440 × 400 mm (1.73 × 17.32 × 15.75 in) (H ×...
  • Page 25 Item S5590-24UXM4YC-EI S5590-48UXM4YC-EI Fan tray, power supply, and expansion card slots Expansion slot Power supply slot Fan tray slot Power supply specifications Power input AC input Power "Removable power supplies" specifications PoE power capacity Max PoE power 100 W capacity per port Total PoE power...
  • Page 26 Item S5590-24UXM4YC-EI S5590-48UXM4YC-EI 100% load Thermal consumption Thermal consumption (static) Single power input: 191 BTU/h Single power input: 214 BTU/h Data Dual power inputs: 225 BTU/h Dual power inputs: 252 BTU/h collection standard: no load Thermal consumption (typical) Data collection Single power input: 279 BTU/h Single power input: 375 BTU/h standard: fully...
  • Page 27 Item S5590-24UXM4YC-EI S5590-48UXM4YC-EI Mean time to repair (MTTR) (hour) Availability 99.99984% 99.999832% Environment specifications Sound pressure level 47.9 dB 47.9 dB at 27°C (80.6°F) Altitude 0 m to 5000 m (0 ft to 16404.20 ft) –5°C to +45°C (23°F to 113°F) Operating Note: temperature...
  • Page 28 Table1-8 Thermal consumption for the S5590-24UXM4YC-EI and S5590-48UXM4YC-EI switches (full load) Power supply S5590-24UXM4YC-EI S5590-48UXM4YC-EI configuration 1 × PSR600-54A-B 1808 BTU/h 1877 BTU/h 1 × PSR920-54A-B 2969 BTU/h 3105 BTU/h 1 × PSR1600-54A-B (90 3156 BTU/h 3255 BTU/h VAC to 176 VAC) 1 ×...
  • Page 29 S5590-28P8XC-E S5590-48P6XC-E S5590-24UXM4Y S5590-48UXM4Y C-EI C-EI Total Total Total Total Power supply configuration power power power power power power power power capaci capaci capaci capaci capaci capaci capaci capaci ty per ty per ty per ty per port port port port 1 ×...
  • Page 30: Chassis Views

    Chassis views S5590-HI switch series S5590-28T8XC-HI Figure2-1 Front panel (2) 10/100/1000BASE-T autosensing Ethernet port (1) 10/100/1000BASE-T autosensing Ethernet port (3) Console port (CONSOLE) (4) Mode button (5) System status LED (SYS) (6) Mode LED (MODE) (7) Expansion card status LED 1 (SLOT1) (8) Expansion card status LED 2 (SLOT2) (9) USB port (10) Management Ethernet port LED (ACT/LINK)
  • Page 31 The S5590-28T8XC-HI switch came with two fan tray slots empty. You must install two fan trays of the same model for the switch. In Figure2-2, two LSPM1FANSB-SN fan trays are installed in the fan tray slots. The S5590-28T8XC-HI switch came with two expansion slots each installed with a filler panel. You can select expansion cards for the switch as required.
  • Page 32 S5590-28S8XC-HI Figure2-5 Front panel (1) SFP port (2) SFP port LED (3) Console port (CONSOLE) (4) Mode button (5) System status LED (SYS) (6) Mode LED (MODE) (7) Expansion card status LED 1 (SLOT1) (8) Expansion card status LED 2 (SLOT2) (9) USB port (10) Management Ethernet port LED (ACT/LINK) (11) Management Ethernet port (MGMT)
  • Page 33 S5590-48S4XC-HI Figure2-7 Front panel (1) SFP port (2) SFP port LED (3) SFP+ port (4) Console port (CONSOLE) (5) Mode button (6) System status LED (SYS) (7) Mode LED (MODE) (8) Expansion card status LED 1 (SLOT1) (9) Expansion card status LED 2 (SLOT2) (10) USB port (11) Management Ethernet port LED (ACT/LINK) (12) Management Ethernet port (MGMT)
  • Page 34: S5590-Ei Switch Series

    S5590-EI switch series S5590-28T8XC-EI Figure2-9 Front panel (2) 10/100/1000BASE-T autosensing Ethernet port (1) 10/100/1000BASE-T autosensing Ethernet port (3) SFP port (4) SFP+ port (5) Management Ethernet port (MGMT) (6) Console port (CONSOLE) (7) Mode button (8) USB port (9) System status LED (SYS) (10) Mode LED (MODE) (11) Expansion card status LED (SLOT) (12) Power supply 2 status LED (PWR2)
  • Page 35 S5590-48T4XC-EI Figure2-11 Front panel (2) 10/100/1000BASE-T autosensing Ethernet port (1) 10/100/1000BASE-T autosensing Ethernet port (3) Management Ethernet port (MGMT) (4) Console port (CONSOLE) (5) Mode button (6) USB port (7) System status LED (SYS) (8) SFP+ port (9) Mode LED (MODE) (10) Expansion card status LED (SLOT) (11) Power supply 2 status LED (PWR2) (12) Power supply 1 status LED (PWR1)
  • Page 36 S5590-28S8XC-EI Figure2-13 Front panel (1) SFP port (2) SFP port LED (3) 10/100/1000BASE-T autosensing Ethernet port (4) Management Ethernet port (MGMT) (5) Console port (CONSOLE) (6) Mode button (7) USB port (8) System status LED (SYS) (9) Mode LED (MODE) (10) Expansion card status LED (SLOT) (11) Power supply 2 status LED (PWR2) (12) Power supply 1 status LED (PWR1)
  • Page 37 The S5590-28S8XC-EI switch with PID LS-5590-28S8XC-EI-GL supports shipping with fan trays and power supplies installed. For the switch to be shipped with fan trays or power supplies installed, contact the marketing staff. S5590-48S4XC-EI Figure2-15 Front panel (1) SFP port (2) SFP port LED (3) Management Ethernet port (MGMT) (4) Console port (CONSOLE) (5) Mode button...
  • Page 38 The S5590-48S4XC-EI switch with PID LS-5590-48S4XC-EI-GL supports shipping with fan trays and power supplies installed. For the switch to be shipped with fan trays or power supplies installed, contact the marketing staff. S5590-28P8XC-EI Figure2-17 Front panel (2) 10/100/1000BASE-T autosensing Ethernet port (1) 10/100/1000BASE-T autosensing Ethernet port (3) SFP port (4) SFP+ port...
  • Page 39 The S5590-28P8XC-EI switch came with one expansion slot installed with a filler panel. You can select an expansion card for the switch as required. In Figure2-18, an LSWM2QP2P interface card is installed in the expansion slot. The S5590-28P8XC-EI switch with PID LS-5590-28P8XC-EI-GL supports shipping with fan trays and power supplies installed.
  • Page 40 The S5590-48P6XC-EI switch with PID LS-5590-48P6XC-EI-GL supports shipping with fan trays and power supplies installed. For the switch to be shipped with fan trays or power supplies installed, contact the marketing staff. S5590-24X4YC-EI Figure2-21 Front panel (1) SFP+ port (2) SFP28 port (3) Management Ethernet port (MGMT) (4) Console port (CONSOLE) (5) Mode button...
  • Page 41 S5590-48TS4X2QC-EI Figure2-23 Front panel (2) 10/100/1000BASE-T autosensing Ethernet port (1) 10/100/1000BASE-T autosensing Ethernet port (3) SFP port (4) SFP port LED (5) SFP+ port (6) SFP+ port LED (7) QSFP+ port (8) Management Ethernet port LED (ACT) (9) Management Ethernet port (MGMT) (10) Management Ethernet port LED (LINK) (11) USB port (12) Console port (CONSOLE)
  • Page 42 S5590-24UXM4YC-EI Figure2-25 Front panel (2) 10/100/1000BASE-T autosensing Ethernet port (1) 10/100/1000BASE-T autosensing Ethernet port (3) 1000/2.5G/5G/10G BASE-T autosensing (4) 1000/2.5G/5G/10G BASE-T autosensing Ethernet port Ethernet port LED (5) SFP28 port (6) Console port (CONSOLE) (7) Mode button (8) USB port (9) System status LED (SYS) (10) Mode LED (MODE) (11) Management Ethernet port LED (LINK/ACT)
  • Page 43 S5590-48UXM4YC-EI Figure2-27 Front panel (2) 10/100/1000BASE-T autosensing Ethernet port (1) 10/100/1000BASE-T autosensing Ethernet port (3) 1000/2.5G/5G/10G BASE-T autosensing (4) 1000/2.5G/5G/10G BASE-T autosensing Ethernet port Ethernet port LED (5) Management Ethernet port (6) Console port (CONSOLE) (7) Expansion card status LED (SLOT) (8) Mode button (9) USB port (10) System status LED (SYS)
  • Page 44 Removable components and compatibility matrixes The switch supports removable components. Table3-1 Table3-2 describes the removable components available for the switch. Table3-1 Compatibility matrix between switches and removable components (1) S5590-28T8X C-EI S5590-28T8X S5590-48T4X S5590-28S8X S5590-28P8X S5590-24UX C-HI C-HI C-EI C-EI M4YC-EI FRU model S5590-28S8X...
  • Page 45 S5590-28T8X C-EI S5590-28T8X S5590-48T4X S5590-28S8X S5590-28P8X S5590-24UX C-HI C-HI C-EI C-EI M4YC-EI FRU model S5590-28S8X S5590-48S4X S5590-48T4X S5590-48P6X S5590-48UX C-HI C-HI C-EI C-EI M4YC-EI S5590-48S4X C-EI see Table3-3. LSWM2ZSP8 Supported Supported Supported Not supported LSWM2SP2P Supported Supported Supported Supported LSWM2SP4P Supported Supported Supported...
  • Page 46 Table3-3 Expansion card and expansion slot compatibility for the S5590-48T4XC-HI and S5590-48S4XC-HI switches S5590-48T4XC-HI S5590-48S4XC-HI Expansion card Expansion slot 1 Expansion slot 2 mode0 mode1 mode2 mode0 mode1 mode2 LSPM6FWD Supported Supported Supported Supported Supported supported LSWM2EC Supported Supported Supported Supported Supported supported...
  • Page 47: Removable Power Supplies

    Removable power supplies 250W power supplies (PSR250-12A and PSR250-12A1) View Figure4-1 PSR250-12A AC power supply view Status LED 电源模块状态指示灯 Latch (blue) 锁闩(蓝色) Power receptacle Handle 电源模块输入插口 电源模块拉手 The views of the PSR250-12A and PSR250-12A1 AC power supplies are similar, with only differences in the latch color and identifier.
  • Page 48: 180W Ac Power Supplies (Psr180-12A-F And Psr180-12A-B)

    Item Specification HVDC input: 240 VDC AC input: 90 VAC to 290 VAC @ 47 to 63 Hz Max AC input voltage range HVDC input: 180 to 320 VDC Rated input current 2 A to 4 A Rated output current 2.5 A to 5 A Rated output voltage 3.3 V to 12 V...
  • Page 49: 180W Dc Power Supply (Psr180-12D-B)

    Technical specifications Table4-4 Technical specifications Item Specification Dimensions (H × W × D) 41.1 × 101.6 × 207 mm (1.62 × 4.00 × 8.15 in), including the handle Weight 0.8 kg (1.76 lb) Rated AC input voltage range 100 VAC to 240 VAC @ 50 or 60 Hz Max AC input voltage range 90 VAC to 264 VAC @ 47 to 63 Hz Rated input current...
  • Page 50: 600W Power Supply (Psr600-54A-B)

    Feature Description You can remove one of the power supplies in 1+1 redundancy when the switch Support for hot swapping is operating correctly. Technical specifications Table4-6 Technical specifications Item Specification Dimensions (H × W × D) 41.1 × 101.6 × 207 mm (1.62 × 4.00 × 8.15 in), including the handle Weight 1 kg (2.20 lb) Rated input voltage range...
  • Page 51 Feature Description and load balancing. You can remove one of the power supplies in 1+1 redundancy when the switch Support for hot swapping is operating correctly. Technical specifications Table4-8 Technical specifications Item Specification Dimensions (H × W × D) 40.2 × 73.5 × 213.8 mm (1.58 × 2.89 × 8.42 in), including the handle Weight 1 kg (2.20 lb) AC input: 100 VAC to 240 VAC @ 50 or 60 Hz...
  • Page 52: 1600W Power Supply (Psr1600-54A-B)

    Table4-9 Features provided by the PSR920-54A-B power supply Feature Description Protection against input overcurrent, input undervoltage, output overvoltage, Protection function output current limiting, output shortcircuit, and overtemperature conditions. Two power supplies can be connected in parallel to achieve 1+1 redundancy Support for redundancy and load balancing.
  • Page 53 Features PSR1600-54A-B is an AC power supply with AC or HVDC input and DC output. Table4-11 describes the features provided by the PSR1600-54A-B power supply. Table4-11 Features provided by the PSR1600-54A-B power supply Feature Description Protection against input overcurrent, input undervoltage, output overvoltage, Protection function output current limiting, output shortcircuit, and overtemperature conditions.
  • Page 54: Removable Fan Trays

    Removable fan trays LSPM1FANSA-SN View Figure5-1 LSPM1FANSA-SN fan tray view Handle (blue) 风扇模块把手(蓝色) (Status LED) 风扇模块状态指示灯 For information about the status LED, see "Fan tray status LED on a fan tray." Features The LSPM1FANSA-SN fan tray blows air from the power supply side to the port side. The fan tray features small size, fast heat dissipation, and hot swapping.
  • Page 55: Lspm1Fansb-Sn

    LSPM1FANSB-SN View Figure5-2 LSPM1FANSB-SN fan tray view Handle (red) 风扇模块把手(红色) Status LED 风扇模块状态指示灯 For information about the status LED, see "Fan tray status LED on a fan tray." Features The LSPM1FANSB-SN fan tray draws air from the port side to the power supply side. The fan tray features small size, fast heat dissipation, and hot swapping.
  • Page 56: Expansion Cards

    Expansion cards LSWM2QP2P About LSWM2QP2P The LSWM2QP2P interface card provides two QSFP+ ports. Figure6-1 LSWM2QP2P interface card view QSFP+ port Captive screw QSFP+口 松不脱螺钉 QSFP+ port LED Ejector lever QSFP+口状态指示灯 扳手 Ports and LEDs For information about the ports and transceiver modules and cables available for the ports, see "QSFP+ port."...
  • Page 57: Lswm2Zqp2P

    Figure6-2 LSWM2SP8P interface card view Captive screw SFP+ port 松不脱螺钉 SFP+口 SFP+ port LED Ejector lever SFP+口状态指示灯 扳手 Ports and LEDs For information about the ports and transceiver modules and cables available for the ports, see "SFP port" and "SFP+ port."...
  • Page 58: Lswm2Ec

    Figure6-4 LSWM2ZSP8P interface module view Captive screw SFP28 port 松不脱螺钉 SFP28口 SFP28 port LED SFP28口状态指示灯 Ejector lever 扳手 Ports and LEDs For information about the ports and transceiver modules and cables available for the ports, see "SFP+ port" and "SFP28 port."...
  • Page 59: Lspm6Fwd

    Technical specifications Table6-2 Technical specifications Item Specification Processor Intel C3758, 2.2 GHz 8G DDR4 Flash 64GB EMMC Operating system Linux Maximum number of endpoints that can be 2500 scanned • 1 × management Ethernet port (MGMT) • 1 × console port Ports •...
  • Page 60: Lswm2Sp2Pb

    Ports and LEDs For information about the ports and transceiver modules and cables available for the ports, see "Ports on an LSPM6FWD firewall module." For information about the LEDs, see "LEDs on an LSPM6FWD firewall module." Technical specifications Table6-3 Technical specifications Item Specification Dimensions (H ×...
  • Page 61: Lswm2Zsp4P

    Figure6-8 LSWM2SP4PB interface module view Captive screw SFP+ port 松不脱螺钉 SFP+口 SFP+ port LED Ejector lever 扳手 SFP+口状态指示灯 Ports and LEDs For information about the ports and transceiver modules and cables available for the ports, see "SFP port" and "SFP+ port."...
  • Page 62: Lswm2Qp2Pb

    Technical specifications Table6-4 Technical specifications Item Specification Dimensions (H × W × D) 40.1 × 95.0 × 147.5 mm (1.58 × 3.74 × 5.81 in) Weight 0.4 kg (0.88 lb) Power consumption (static) 5.0 W Power consumption (with 6.0 W typical configuration) Power consumption (fully 11.0 W...
  • Page 63 Item Specification Power consumption (fully 14 W configured)
  • Page 64: Ports And Leds

    Ports and LEDs Ports Console port Table7-1 Console port specifications Item Specification Connector type RJ-45 Compliant standard EIA/TIA-232 Port transmission rate 9600 bps (default) to 115200 bps • Provides connection to an ASCII terminal • Services Provides connection to the serial port of a local PC running terminal emulation program Compatible devices All device models...
  • Page 65: Sfp Port

    All device models NOTE: USB devices from different vendors vary in compatibilities and drivers. H3C does not guarantee correct operation of USB devices from other vendors on the switch. If a USB device fails to operate on the switch, replace it with one from another vendor.
  • Page 66 Central FE SFP transceiver Fiber diameter wavelength Connector transmission module (µm) (nm) distance 40 km (24.86 SFP-FE-LH40-SM1310 1310 Single-mode, 9/125 miles) 80 km (49.71 SFP-FE-LH80-SM1550 1550 Single-mode, 9/125 miles) TX: 1310 SFP-FE-LX-SM1310-BIDI Single-mode, 9/125 15 km (9.32 miles) RX: 1550 TX: 1550 SFP-FE-LX-SM1550-BIDI Single-mode, 9/125...
  • Page 67 GE SFP Central Cable/Fiber Modal transceiver wavelength Connector type and bandwidth transmission module and (nm) diameter (µm) (MHz × km) distance cable SFP-GE-LH20- Single-mode, 20 km (12.43 1310 SM1310-I 9/125 miles) SFP-GE-LH40- Single-mode, 40 km (24.86 1310 SM1310-I 9/125 miles) SFP-GE-LH40- Single-mode, 40 km (24.86...
  • Page 68: Sfp+ Port

    • As a best practice, use H3C transceiver modules and network cables for the switch. • The H3C transceiver modules and network cables are subject to change over time. For the most recent list of H3C transceiver modules and cables, contact H3C Support or marketing staff.
  • Page 69 10GE SFP+ Central Fiber Modal transceiver wavelength Connector diameter bandwidth transmission module (nm) (µm) (MHz × km) distance SFP-XG-LX-S Single-mode, 1310 10 km (6.21 miles) M1310-E 9/125 SFP-XG-LH40 Single-mode, 1550 40 km (24.86 miles) -SM1550 9/125 SFP-XG-LH40 Single-mode, 1550 40 km (24.86 miles) -SM1550-D 9/125 SFP-XG-LH80...
  • Page 70: Sfp28 Port

    • As a best practice, use H3C transceiver modules and network cables for the switch. • The H3C transceiver modules and network cables are subject to change over time. For the most recent list of H3C transceiver modules and cables, contact H3C Support or marketing staff.
  • Page 71 Table7-11 SFP28 transceiver modules available for the SFP28 ports SFP28 Central Cable/Fiber Modal transceiver wavelength Connector type and bandwidth transmission module (nm) diameter (µm) (MHz × km) distance 2000 70 m (229.66 ft) SFP-25G-SR- Multi-mode, MM850 50/125 4700 100 m (328.08 ft) 2000 70 m (229.66 ft) SFP-25G-SR-...
  • Page 72: Qsfp+ Port

    • As a best practice, use H3C transceiver modules and cables for the switch. • The H3C transceiver modules and cables are subject to change over time. For the most recent list of H3C transceiver modules and cables, contact your H3C Support or marketing staff.
  • Page 73 QSFP+ Central Modal Fiber type and transceiver wavelength Connector bandwidth transmission diameter (µm) module (nm) (MHz × km) distance • • QSFP-40G-LR Multi-mode, 1310 10 km (6.21 miles) 4-PSM1310 50/125 Four lanes: • 1271 QSFP-40G-LR Single-mode, • 1291 10 km (6.21 miles) 4-WDM1300 9/125 •...
  • Page 74: Qsfp28 Ports

    • As a best practice, use H3C transceiver modules and cables for the switch. • The H3C transceiver modules and cables are subject to change over time. For the most recent list of H3C transceiver modules and cables, contact your H3C Support or marketing staff.
  • Page 75 QSFP28 Central Modal Maximum Fiber type and transceiver wavelength Connector bandwidth transmission diameter (µm) module (nm) (MHz*km) distance PSM4-SM13 9/125 Four lanes: • 1295.56 QSFP-100G- Single-mode, • LR4-WDM13 1300.05 10 km (6.21 miles) 9/125 • 1304.58 • 1309.14 Four lanes: •...
  • Page 76: 10/100/1000Base-T Ethernet Port

    • As a best practice, use H3C transceiver modules and cables for the switch. • The H3C transceiver modules and cables are subject to change over time. For the most recent list of H3C transceiver modules and cables, contact your H3C Support or marketing staff.
  • Page 77: Combo Interface

    Item Specification • auto-MDI/MDI-X 2.5 Gbps, full duplex • 1 Gbps, full duplex • MDI/MDI-X autosensing 10G mode: • 55 m (180.45 ft) over Category-6 unshielded twisted pair cable • 100 m (328.08 ft) over Category-6 shielded twisted pair cable •...
  • Page 78: Ports On An Lspm6Fwd Firewall Module

    Item Specification • 10 Mbps, full duplex MDI/MDI-X Supported autosensing Transmission medium Category-5 or above twisted pair cable Max transmission 100 m (328.08 ft) distance Compliant standard IEEE 802.3i, 802.3u, and 802.3ab Connects to a local PC or remote station for network management or software Functions and services upgrade Table7-23 USB port specifications...
  • Page 79: Connecting Cables To The Ports On Expansion Cards

    Item Specification • 10 Mbps, half/full duplex • 100 Mbps, half/full duplex Rate and duplex mode • 1000 Mbps, full duplex Connecting cables to the ports on expansion cards To connect cables to the ports on expansion cards, follow these guidelines: •...
  • Page 80: Mode Led

    Mode LED The mode LED (MODE) works in conjunction with the port status LEDs to show more information about the switch. The mode LED indicates the type of information that the port status LEDs are showing. After you press the mode button to change the mode LED status into flashing green or flashing yellow, the mode LED keeps in that state for only 45 seconds and then turns steady green automatically.
  • Page 81: Sfp28 Port Led

    SFP+ port LED Table7-31 SFP+ port LED description SFP+ port LED Mode LED status Description status Steady green The port is operating at 10 Gbps. Flashing green The port is sending or receiving data at 10 Gbps. Steady green (rate mode) Steady yellow The port is operating at 1 Gbps.
  • Page 82: Qsfp28 Port Led

    QSFP28 port LED Table7-34 QSFP28 port LED description LED status Description Steady green A module has been installed and the port is operating at 100 Gbps. Flashing green The port is sending or receiving data at 100 Gbps. Steady yellow A module has been installed and the port is operating at 40 Gbps.
  • Page 83: Expansion Card Status Led

    LED status Description Steady yellow The port is operating at 1 Gbps, 2.5 Gbps, or 5 Gbps. Flashing yellow The port is sending or receiving data at 1 Gbps, 2.5 Gbps, or 5 Gbps. No link is present on the port. Expansion card status LED The S5590-HI switch series provides two expansion slots at the rear.
  • Page 84: Status Leds On A 600W/920W/1600W Power Supply

    LED status Description The power supply does not have power input. Status LEDs on a 600W/920W/1600W power supply The PSR600-54A-B, PSR920-54A-B, and PSR1600-54A-B power supplies each have two status LEDs to indicate the power input and output status. Table7-40 Description for the status LEDs on a 600W/920W/1600W power supply Mark Status Description...
  • Page 85: Leds On An Lspm6Fwd Firewall Module

    LEDs on an LSPM6FWD firewall module Table7-43 Description for the LEDs on an LSPM6FWD firewall module Mark Status Description No link is present on the port. Management Ethernet port ACT/LINK Steady green A link is present on the port. Flashing green The port is sending or receiving data.
  • Page 86: Cooling System

    Cooling system To dissipate heat timely and enhance system stability, the switch uses a high-performance cooling system. Consider the site ventilation design when you plan the installation site for the switch. The switch uses removable fan trays and provides airflow from the port side to the power supply side or from the power supply side to the port side by using different types of fan trays.

Table of Contents