Table of Contents
Advertisement
Battery Replacement
The transmitter is powered by two lithium cells (CRXXXX). When the transmitter
stops functioning, replace the batteries.
1.
Release the lock on the battery cover.
2.
Remove the battery cover.
3.
Remove the old batteries.
4.
Install two new lithium batteries (CRXXXX) into the transmitter with the
positive (+) mark toward the battery cover.
5.
Install the battery cover and lock it.
6.
Push the lock button on the transmitter. The buzzer should sound
indicating that the batteries are installed properly.
NOTE: do not install old and new batteries together.
P.24
User Guide
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the Smart Start ASRF-1510 and is the answer not in the manual?
Questions and answers
The blue light on my receiver is no longer flashing and, therefore, the remote starter isn't working. I don't know how to get it back to the blue light flashing?
To enable the LED flashing on your Directed Smart Start ASRF-1510 receiver, press and hold the designated buttons simultaneously until the parking lights flash once.
This answer is automatically generated