Getting Started
System Maintenance
The system requires no specific maintenance beyond battery replace-
ment for the remote controls. Your 1-way remote control is powered by
a coin cell battery (CR-2032) that can be purchased at most retailers.
The operating range diminishes as the battery weakens.
Battery Replacement
Locate the small slot on the side of the remote control. Insert a small
slotted screwdriver or equivalent tool into slot and pry the case apart.
Replace battery while verifying the correct polarity and then snap case
together.
1-way Remote Control
Feature
Transmit LED
Command buttons (4)
© 2010 Directed Electronics. All rights reserved.
Description
On (flashes) during remote control activity
Used to perform arming/locking, disarming/unlocking, auxil-
iary channel and remote start commands
3
Need help?
Do you have a question about the SmartStart 5000 Series and is the answer not in the manual?