Aux 2; Oem-Style Alarm; Intrusion Codes Via Horn - Directed Smart Start ASRF-1510 User Manual

Note: Pressing the AUX button 2x quickly causes the LED to flash slowly and to
shift to level 1 (AUX 2, configurable by your installer). Pressing the AUX button
3x quickly causes the LED to flash fast and to shift to level 2 (second car
operation).

AUX 2

If configured at installation, this feature can be activated by pressing the 2x on
the AUX button (or "Shift level 1") followed by pressing the
the LED is slowly flashing.

OEM-Style Alarm

The OEM-style alarm (if configured by your installer) monitors the doors, hood
and ignition switch of your vehicle. It will sound the horn if a door or the hood is
opened, or if the key is turned in the ignition.

To arm the OEM-style alarm, press the
transmitter.

The OEM-style alarm will ONLY arm if the
transmitter is pressed.

-The LED on the antenna will flash slowly to indicate that the OEM-style
alarm is now armed.

To disarm the OEM-style alarm, press the
transmitter.

To stop the horn from sounding if the OEM-style alarm is triggered,
press the
Valet Mode (page 13)

Intrusion Codes via horn

The system monitors the following:

Doors

Hood

Ignition
Note: If an intrusion has occurred the HORN will sound for a maximum of
1 minute.
User Guide
or button, or put the system in and out of
button while
button on the
button on the
button on the
P.21