Dtk - Hardware Update Bootable Iso; Dell Openmanage Drac Tools (Racadm) - Dell EMC ScaleIO Ready Node 14G Manual

Reference Material

DTK - Hardware Update Bootable ISO

Dell OpenManage DRAC Tools (RACADM)

Update the hardware using remote RACADM
Hardware Configuration and Operating System Installation Guide - ESXi Servers
68
The command output tells you whether the installation succeeded.
9. Right-click the ESXi host and select Power
10. Optionally view the information about the installed VIBs:
esxcli --server <IP> software vib get
or
software vib list
11. From the iDRAC web interface, open the iDRAC settings
ensure that the iDRAC Service Module status is Running
The Dell OpenManage Deployment Toolkit (DTK) includes a set of utilities, sample
scripts, and sample configuration files that you can use to deploy and configure the
Dell systems. This section provides additional information on using the ScaleIO Ready
Node Hardware Update Bootable ISO ("Hardware ISO") to update drivers, BIOS, and
firmware on ScaleIO Ready Node servers.
An integrated Dell Remote Access Controller (iDRAC) with Lifecycle Controller is
embedded in every Dell PowerEdge server. The RACADM command-line utility
provides a scriptable interface that enables you to configure the iDRAC either locally
or remotely. The utility runs on the management station and the managed system.
The RACADM utility supports the following interfaces:
Local - Supports running RACADM commands from the managed server's
l
operating system. To run local RACADM commands, install the OpenManage
software on the managed server. Only one instance of Local RACADM can be
executed on a system at a time.
SSH or Telnet (also known as Firmware RACADM) - Firmware RACADM is
l
accessible by logging in to iDRAC using SSH or Telnet.
Remote - Supports running RACADM commands from a remote management
l
station such as a laptop or desktop running Windows or Linux. To run Remote
RACADM commands, install the DRAC Tools utility from the OpenManage
software on the remote computer.
Note
For information regarding RACADM commands, see the
You can install and execute the Dell RACADM tool from any management system with
access to the iDRAC network. The remote RACADM command set is useful in this
situation to mount and execute the Hardware ISO to a large number of ScaleIO Ready
Node servers. This prevents the need for multiple web browser windows and manual
keyboard and mouse clicks for each server.
Reboot.
>
Overview page and
>
RACADM CLI Guide.