Dell EMC ScaleIO Ready Node 14G Manual page 33

Note
The parameter option of Lockdown Mode must be Disabled. If it is not,
change it. To change the parameter option from
in the Lockdown Mode pane and change the parameter value to
5. Configure the SSH parameter:
a. In the vSphere Web Client screen, under Manage menu, select Settings
System Security Profile.
>
System-defined parameter panes such as Services and Lockdown Mode,
with predefined parameter options, are displayed in the work area.
b. Scroll down to access the Services pane and verify the SSH option.
Note
SSH must be Running (that is, the SSH connection is established). If SSH is
Stopped, you must change it to Running.
c. To change SSH option to Running:
a. Click Edit in the Services pane.
b. In the Edit Security Profile screen, select the SSH parameter.
The SSH status is
c. Click Start.
The SSH status changes to
For SSH status as
d. Click OK.
The SSH status changes to
6. Restart the management service or restart the server.
Stopped .
Running .
Stopped , Start is active and Stop is grayed out.
Running .
Prepare the servers for deployment
Installing the Operating System
Enable to Disable , click Edit
Disable .
>
33