Dell EMC ScaleIO Ready Node 14G Manual page 53

8. Click OK to approve the selection.
9. In the Configure Management Network window, scroll to IP Configuration,
and press Enter.
10. In the IP Configuration popup window, change the selected option to Set
static IP address and network configuration, using the Up/Down arrow keys
for navigation and the Space bar for selection.
11. Use the Up/Down arrow keys to move to the IP address fields, and type the
node's Management IP Address, Subnet Mask, and Default Gateway.
12. Press Enter to apply the IP address changes.
13. In the Configure Management Network window, press Esc to exit the window.
When the confirmation popup window appears, press Y to approve and apply
the configuration.
Results
Configuration of the Management IP address is now complete. The node can now be
connected to a vCenter. Once connected, validate that the IP address configuration
performed in these steps is correct.
Note
Data IP addresses, vSwitches, and all ScaleIO VM IP addresses are configured during
the plug-in deployment flow.
Configure the Management IP address - ESXi
Port Configuration
53