Open The Kvm Console - Dell EMC ScaleIO Ready Node 14G Manual

Open the KVM console

7. Verify that no disk is in the failed state.
If any of the disks is failed, refer to the relevant disk FRU.
8. In the navigation pane, select System.
9. In the Inventory pane, verify that the server drivers and firmware in the
Firmware Inventory list match the required versions, as published in the
ScaleIO Ready Node Driver and Firmware
If the driver and firmware versions do not match the matrix, you must update
them. See "Updating the BIOS, firmware and settings" in the ScaleIO Ready
NodeAMS Deployment Guide .
Open the KVM console on a server in a ScaleIO system.
Before you begin
Ensure that:
The system environment meets the prerequisites for using the KVM console.
l
You know the IP address of the BMC (iDRAC) port.
l
You know the username and password for accessing the BMC (iDRAC) (default
l
username/password are root/password).
Procedure
1. From your Internet browser, go to https://
2. In the DELL Console Login window, type the user name and password, and
click Login.
3. From the dashboard, click Launch Virtual Console to start a console session.
A popup security warning screen is displayed.
4. Select Accept and click Run.
The Java Console window opens and provides you with console access to the
server.
If this is the first time that you are opening a console, additional warning and
confirmation prompts may appear. Click OK to grant approvals in these
prompts.
The subsequent steps depend on your browser selection and how it is
configured. If downloads run automatically, the console window appears. If not,
follow the instructions given in the next step to open the console window.
5. Depending on your browser, perform the following steps:
Browser Steps
Firefox
a. Click Launch Virtual Console.
b. Click OK.
c. Scroll through the successive pop-up windows, then click
The "What should Firefox do with this file?" window
appears, with the Open with Java(™) Web Start Launcher
option selected.
Run to launch the console.
Configuring the Hardware
Matrix.
<iDRAC_IP_address> .
Open the KVM console
21