Open The Kvm Console - 13G Servers - Dell EMC VxFlex Ready Node 13G Manual

Open the KVM console - 13G servers

7. Verify that no disk is in failed state.
If any of the disks is failed, refer to the relevant Disk Replace FRU.
8. In the navigation pane, select Server.
9. In the System Inventory pane, verify that the server drivers and firmware in
the Firmware Inventory list match the required versions, as published in the
VxFlex Ready Node Driver and Firmware Matrix. To access the Driver and
Firmware Matrix, go to https://support.emc.com/products/41077.
If the driver and firmware versions do not match the matrix, you must update
them using the DTK - Hardware Update Bootable ISO.
Open the KVM console on a VxFlex Ready Node 13G server.
Before you begin
Ensure that:
The system environment meets the prerequisites for using the KVM console.
l
You know the IP address of the BMC (iDRAC) port.
l
You know the username and password for accessing the BMC (iDRAC) (default
l
username/password are root/password).
Procedure
1. From your Internet browser, go to https://
2. In the DELL Console Login window, type the user name and password, and
click Login.
3. In the main KVM console window, select the Server node in the navigation
pane.
The System Summary dashboard is displayed.
4. In the Virtual Console Preview pane, click Launch to start a console session.
A popup security warning screen is displayed.
5. Select Accept and click Run.
The Java Console window opens and provides you with console access to the
server.
If this is the first time that you are opening a console, additional warning and
confirmation prompts may appear. Click OK to grant approvals in these
prompts.
The subsequent steps depend on your browser selection and how it is
configured. If downloads run automatically, the console window appears. If not,
follow the instructions given in the next step to open the console window.
6. Depending on your browser, perform the following steps:
Browser Steps
Firefox
a. Click Launch Virtual Console.
The "What should Firefox do with this file?" window
appears, with the Open with Java(™) Web Start Launcher
option selected.
Open the KVM console - 13G servers
Configuring the Hardware
<iDRAC_IP_address> .
21