Table of Contents
Advertisement
CONTRAST
This feature enhances the difference in color and light
between parts of an image. You can set the CONTRAST
value from 1 to 10.
SHARPNESS
Sharpness determines the amount of detail an imaging
system can reproduce. You can set the SHARPNESS
value from 1 to 10.
COLOR GAIN
Adjust this feature to change the saturation of the color.
The value ranges from 1 to 10.
3D DNR (Digital Noise Reduction)
The 3D DNR function can decrease the noise effect,
especially when capturing moving images in low light
conditions and delivering more accurate and sharp
image quality. You can set the DNR value from 1 to 10.
MIRROR
DEFAULT, H, V, and HV are selectable for mirror.
DEFAULT: The mirror function is disabled.
H: The image flips 180° horizontally.
V: The image flips 180° vertically.
HV: The image flips 180° both horizontally and
vertically.
3.3.5 FUNC (Functions)
In the FUNC sub-menu, you can set the privacy mask,
the motion detection, and camera ID of the camera.
PRIVACY
The privacy mask allows you to cover certain areas
which you don't want to be viewed or recorded. Up to 4
privacy areas are configurable.
Select a PRIVACY area. Set the DISPLAY status as ON.
Click up/down/left/down button to define the position
and size of the area.
MOTION
In the user-defined motion detection surveillance area,
the moving object can be detected and the alarm will
be triggered. Up to 4 motion detection areas can be
configured.
MOTION
MODE
AREA 0
AREA 1
AREA 2
AREA 3
SENSITIVITY
COLOR
TRANSPARENCY
RETURN
PRIVACY
OFF
50
RED
OFF
MOTION
Advertisement
Table of Contents
