Table of Contents
Advertisement
Disassemble the 3-axis bracket.
(1) Hold the base with one hand.
(2) Rotate the pole anticlockwise to disassemble the
pole from the base.
Install the fixed tray to the ceiling with supplied
screws.
Install the base to the fixed tray.
Install the Mounting Base to the Fixed Tray
Install the camera to the bracket.
Connect the corresponding power cord, and video
cable.
Power on the camera to check whether the image
on the monitor is gotten from the optimum angle.
If not adjust the surveillance angle.
(1) Loosen the knob to adjust the panning position
and tilting position.
(2) After adjusting the angle of the camera to the
desired position, fasten the knob.
Disassemble the Bracket
Install the Camera
Knob
360°
Adjust the Camera
90°
Advertisement
Table of Contents
