Connecting An Rgb Video Source - Epson PowerLite 410W User Manual

Connecting an RGB Video Source

Follow these instructions to connect the projector to a video player or
satellite receiver that has an RGB video output port using the VGA
computer cable that came with the projector.
Before starting, make sure the projector and your DVD player or
other video source are turned off.
1. Connect one end of the VGA computer cable to the
or port on the projector.
Computer2
2. Connect the other end to the video port on your player.
3. To play sound through the projector, follow the instructions
beginning on page 31.
If you don't need to make any other connections, you can plug in
your projector and turn it on. See page 36 for instructions.
If more than one device is connected to the projector, select
or
Computer 1 Computer 2
pressing the
Source Search
control. See page 38.
Computer1 and Computer2 ports
as the source after projection starts by
button on the projector or remote
Computer1
Setting Up the Projector
29