Registering A Projector; Monitoring Your Projector - Epson PowerLite 410W User Manual

To close EMP Monitor, select
the program icon shown above, then select

Registering a Projector

Before you can monitor a projector, you have to register it. Follow
these steps to automatically search for your projector.
1. Open EMP Monitor.
2. Select
Edit > New > Projector (automatic search)
3. Click to locate projectors currently operating on the
Search
network.
4. Select the projector you want to add by clicking its name, then
click the button.
Edit
5. Enter a Display name, select a Parent group, if necessary, enter a
Monitor Password, if necessary, and a Description for the
projector.
6. Click the
Register
7. Repeat steps 2 through 5 to register any additional projectors on
the network.
8. When you're done adding the projector, click
screen with a list of all registered projectors:

Monitoring Your Projector

The EMP Monitor screen lets you monitor your projector status and
check if a problem has occurred.
For the most current status, click the
For additional information on monitoring your projector, see the
EMP Monitor Operation Guide on the network software CD-ROM.
from the File menu or right-click
Exit
Exit
button.
Refresh
.
.
. You see a
Cancel
button.
Monitoring the Projector Over a Network
note
If the projector is not
automatically found, your
projector may not be
connected or configured
correctly for the network. See
page 95.
To delete a projector from
the list, right-click the
projector name, and click
.
Delete
note
To monitor a projector
when it's in standby mode
(plugged in but not turned
on), you must select
as the
Network On
setting in
Standby Mode
the projector's Extended
menu (see page 62).
For detailed status
information, right-click the
projector and click
.
Property
99