Epson PowerLite 410W User Manual page 21

Connect one end of the cable to the projector's
port.
Computer2
3. Connect the other end of the cable to your computer's video-out
or monitor port.
If you're using a PowerBook or iBook and you can't connect the
cable, you may need to use an optional Macintosh video adapter;
see your computer dealer.
4. If you connected the computer to the
want to view the display simultaneously on your computer
monitor and the projector screen, see "Connecting an External
Monitor" on page 23.
5. To play audio from your computer through the projector speaker,
see "Playing Sound Through the Projector" on page 24.
6. Tighten the screws on the connectors.
If you don't need to make any other connections, you can plug in
your projector and turn it on. See page 36 for instructions.
If more than one device is connected to the projector, select the
correct source after projection starts by pressing the
button on the projector or remote control. See page 38.
Computer1
Computer1 and Computer2 ports
port and you
Computer1
Source Search
or
Setting Up the Projector
21