Replacing The Batteries - Epson PowerLite 410W User Manual

Replacing the Batteries

The remote control uses two AA alkaline batteries. Follow these steps
when you need to replace them:
1. Press in the tab to remove the battery cover.
2. Remove the old batteries, then insert the new ones as shown.
3. Replace the battery cover. (It should click into place.)
note
The remote control
automatically shuts off when
it detects a button being
pressed more than
30 seconds. This conserves
battery life. It can be
helpful, for example, when
the remote is in a carrying
case and the P
Power
button is accidentally
pushed.
caution
When replacing batteries,
take the following
precautions:
Replace the batteries as
■
soon as they run out. If a
battery leaks, wipe away
battery fluid with a soft
cloth. If fluid gets on your
hands, wash them
immediately.
Do not expose batteries to
■
heat or flame.
Dispose of used batteries
■
according to local
regulations.
Remove the batteries if
■
you won't be using the
remote control for a long
period of time.
Using the Remote Control
51