Download Print this page
   

Advertisement

Epson PowerLite 410W

Using the Remote Control

T
he remote control lets you access your projector's features from
anywhere in the room—up to 20 feet (6 m) away. For example, you
can turn the projector on and o , freeze the presentation, zoom in on
a portion of your image, and access the menu system. (The projector
menus let you adjust many projector settings; see Chapter 4.)
When using the remote control, stand within 20 feet (6 m) of the
projector. Point the remote control either at the front or back of the
projector or at the screen (the projector's front sensor can detect
signals bounced o the screen). Press the button for the function you
want to use.
This chapter covers the following information:
Controlling the picture and sound
Replacing the remote control batteries
Controlling the Picture and Sound
You can use the remote control to select your source, adjust the colors,
temporarily turn o the picture and sound, freeze the action, or zoom
in on the picture. Make sure you have set up your projector and
connected any equipment as described in Chapter 1.
Switching Between Picture Sources
If you've connected your projector to more than one computer and/or
video source, you can use the
or remote control to switch between the di erent sources.
After you select a source, the screen goes dark for a moment before the
image appears. The name of the selected source (such as
or
) appears brie y on the screen.
S-Video
button on the projector
Source Search
Source Search
button
INSTALLATION HANDBOOK
Computer1
Remote Control Information
1

Advertisement

   Related Manuals for Epson PowerLite 410W

   Summary of Contents for Epson PowerLite 410W

  • Page 1: Using The Remote Control

    INSTALLATION HANDBOOK Epson PowerLite 410W Remote Control Information Using the Remote Control he remote control lets you access your projector’s features from anywhere in the room—up to 20 feet (6 m) away. For example, you can turn the projector on and o , freeze the presentation, zoom in on a portion of your image, and access the menu system.

  • Page 2

    INSTALLATION HANDBOOK Epson PowerLite 410W Remote Control Information Adjusting the Color Mode You may want to adjust the color mode to select a di erent setting that is appropriate for the image you’re projecting and the environment in which you’re projecting it. Press the Color Mode button on the remote control.

  • Page 3

    INSTALLATION HANDBOOK Epson PowerLite 410W Remote Control Information Stopping Action Press the button to stop the action in your video or computer Freeze image and keep the current image on the screen. The sound will continue, however. Also, because the source continues to transmit signals, you won’t resume the action from the point you paused it.

  • Page 4

    INSTALLATION HANDBOOK Epson PowerLite 410W Remote Control Information Zoom Displays images using the full width of the projection area and maintains the aspect ratio of the image. 4:3 ratio images are cut o on the top and bottom. Full Displays images using the full width of the projection area, but does not retain the aspect ratio.

  • Page 5: Replacing The Batteries

    INSTALLATION HANDBOOK Epson PowerLite 410W Remote Control Information Replacing the Batteries The remote control uses two AA alkaline batteries. Follow these steps note when you need to replace them: The remote control 1. Press in the tab to remove the battery cover.

Comments to this Manuals

Symbols: 0
Latest comments: