Solving Problems With The Image Or Sound - Epson PowerLite 410W User Manual

Solving Problems
84
Solving Problems with the Image or
Sound
No image appears on the screen.
■ Check that the P
cover is removed. Also press the
control to see if the picture was turned off temporarily.
If the projector doesn't turn on, the Control Panel Lock may be
■
enabled. Press and hold the
7 seconds to release the lock.
■ The projector may be in standby or sleep mode. If the projector
has not received any signal for 30 minutes, it turns off the lamp to
conserve the lamp life and save energy. If the P
orange, press the P
The attached computer may also be in sleep mode or displaying a
black screen saver. Try pressing a key on the computer.
If the power was switched off and then on again, wait until the
■
light stops flashing and remains orange. Then press the
Power
P
button again.
Power
P
Check the
■ Video Signal
setting in the Signal menu to make sure it is correct for the
Input
selected source. See page 58 for more information.
Messages may have been turned off in the
■
Extended menu. See page 62 for details.
Adjust the
■
Brightness
or select for the
High
menu (see page 61).
With
■ Direct Power On
Extended menu, if you unplug the projector and then plug it right
back in, you must press the P
projector. See page 62 for details.
■ Make sure at least one of the projector's remote receivers are
turned on in the Settings menu. See page 60 for details.
light is green, not flashing, and the lens
Power
A/V Mute
button on the projector for
Enter
button to turn on the projector.
Power
,
Computer1 Input
setting on the Image menu (see page 57)
Brightness Control
enabled in the
Operation
button to turn on the
Power
button on the remote
light is
Power
, or
Computer2
setting of the
Display
setting in the Settings
setting of the