Setting Up Projector E-Mail Alerts - Epson PowerLite 410W User Manual

■
SNMP
If you're a network administrator, you can use the SNMP
option to enter trap IP addresses. This lets you receive trap
alerts for the projector on a computer running the SNMP
Manager software.
■
Mail
When enabled, the projector sends you an e-mail alert if it has
any problems. For instructions on setting up e-mail alerts, see
the next section.
■
Projector Name
Enter a name for identifying the projector over the network.
■
AMX Device Discovery
Turn on to allow the projector to be detected by AMX
Device Discovery-enabled software, if you are using it on
your network.

Setting Up Projector E-mail Alerts

When this feature is enabled, the projector sends you an e-mail alert if
it has any problems.
1. Press the button, select the
Menu
.
Enter
2. Select and press
Mail
3. Select the following settings as necessary:
■ Mail Notification
Select to enable sending of an e-mail if there is a problem
On
with the projector.
■
SMTP Server
Enter the IP address for the SMTP server for the projector.
You can enter a number from 0 to 255 in each field of the
address.
■
Port Number
Enter the SMTP server's port number. The default value is
25. You can enter a numeric value from 1 to 65535.
Network
.
Enter
®
menu, and press
Monitoring the Projector Over a Network
note
You can also set e-mail alerts
from EMP Monitor (see
page 100).
97