Setting A Password - Epson PowerLite 410W User Manual

note
The default setting for the
option
Startup Screen
menu is . If the
On Startup
is set to , the
Screen Off
logo will not display at
startup.
If the User's Logo Protect
function has been set to
On
the
Display Background
setting cannot be changed.
You need to turn the protect
function off first. See
page 69 for details.
Once you've saved a user's
logo, you cannot reset the
logo setting to its factory
default (no logo).
note
If a password has already
been set, you see the
Password Protect Release
screen. See "Starting the
Projector with a Password"
on page 70.
Fine-tuning the Projector
68
7. When you see this screen, select a zoom rate (display size), and
then press
Enter
8. When you see the message
and press
Yes
not use the projector or other sources (computer, video, etc.)
,
while the logo is being saved. When you see the message
, press
Completed
9. To display the logo as the background screen when you press the
button or when no image signal is available, select the
A/V Mute
menu and press
Extended
Background
and press
Logo
10. When you're finished, press

Setting a Password

1. Press the
Freeze
seconds until you see the Password Protect menu:
2. Select
Password
.
Save image as user's logo?
. Saving the logo takes a few moments. Do
Enter
.
Esc
. Then select
Enter
, and and press
Logo Enter
.
Enter
to exit the menus.
Menu
button on the remote control for about five
and press .
Enter
, select
,
Display Display
. Select and
A/V Mute