Positioning The Projector - Epson PowerLite 410W User Manual

note
You can download the
Projection Distance
Calculator program from
the Drivers & Downloads
section of Epson's website:
www.epson.com/support
Setting Up the Projector
16

Positioning the Projector

Before connecting the projector, you need to decide where to place it.
If the projector isn't already installed in the room you're using, you
can place it on a table in front of the screen. This lets you stand in the
front of the room, face the audience, and control the projector.
Ideally, you should place the projector between 26 to 48 inches (66 to
122 cm) from the screen. Use the illustrations and tables below to
help you determine approximately how far to place it based on the
screen size you're using and the aspect ratio of the image. Image size
can vary depending on how you adjust the zoom and other settings.
Center of
lens
16:10 aspect ratio
Projection distance (A)
Screen size Wide to Tele
55 inches 22 to 30 inches
(140 cm) (56 to 77 cm)
60 inches 24 to 33 inches
(152 cm) (62 to 84 cm)
70 inches 28 to 39 inches
(178 cm) (72 to 99 cm)
80 inches 33 to 45 inches
(203 cm) (83 to 113 cm)
90 inches 37 inches
(229 cm) (94 cm)
100 inches 41 inches
(254 cm) (105 cm)
116 inches 48 inches
(295 cm) (122 cm)
Center of
lens
Offset (B)
3.4 inches
(8.6 cm)
3.7 inches
(9.4 cm)
4.4 inches
(11 cm)
5 inches
(13 cm)
5.6 inches
(14 cm)
6.2 inches
(16 cm)
7.2 inches
(18 cm)