Residual Risk - PRONAR T663/4 Operator's Manual

SECTION 2
• After completing work associated with lubrication, remove excess oil or grease.
The trailer should be kept clean and tidy.
• Exercise caution when climbing on top of the load box. Climbing on top of the
load box is possible by use of ladders placed on the front wall, extension and
draw bar and also folding steps inside the load box. Components not intended to
aid access may not be used for this purpose. Before entering load box prevent
trailer moving with parking brake and chocks.
• Do NOT make independent repairs of control valve, brake cylinders, tipping
cylinder and braking force regulator. In the event of damage to these elements,
repair should be entrusted to authorised service point or elements should be
replaced with new ones.
• Do NOT make repairs to drawbar and drawbar eye (straightening, pad welding or
welding). Damaged drawbar eye should be replaced.
• Do NOT install additional appliances or fittings not according to the specifications
defined by the Manufacturer.
• The trailer may only be towed when axles and wheels, lighting system and brakes
are reliable.

2.2 RESIDUAL RISK

Pronar Sp. z o. o. in Narew has made every effort to eliminate the risk of accidents. There is,
however, a certain residual risk, which could lead to an accident, and this is connected
mainly with the actions described below:
• using the trailer for purposes other than those for which it is intended,
• being between the tractor and the trailer while the engine is running and when the
machine is being attached or hitched to second trailer
• being on the machine during work,
• not maintaining safe distance during loading or unloading of trailer,
• operation of the trailer by persons under the influence of alcohol,
• making modifications to the machine without the consent of the Manufacturer,
2.13
Pronar T663/4 T663/4 SILO