List Of Factory Numbers; Proper Use - PRONAR T683 Operator's Manual

Hide thumbs Also See for T683:
Table of Contents

Advertisement

Pronar T683

1.1.3 LIST OF FACTORY NUMBERS

VIN
S
Z
B
6
FRONT AXLE FACTORY NUMBER
REAR AXLE FACTORY NUMBER
TIP
In the event of ordering a replacement part or in the case of the appearance of problems
it is often essential to give the factory numbers of parts or the VIN number of the trailer,
therefore it is recommended that these numbers are inscribed in the spaces below.

1.2 PROPER USE

The trailer is designed for transport of harvested crops and agricultural products as well as
loose and bulk materials at the farm and on public roads. It is acceptable to transport
construction materials, mineral fertilisers and other loads, if fulfilling conditions indicated in
section 4. Non-compliance with the recommendations of the carriage and loading of goods
described by the Manufacturer and the road transport regulations in force in the country in
which the trailer is used, shall void the guarantee and is regarded as use of the machine not
according to its intended purpose.
The trailer is not intended or designed for transporting people, animals or goods classified as
dangerous materials.
The trailer is constructed according to current safety requirements and engineering
standards. The brake system and the light and indicator system meet the requirements of
road traffic regulations. The maximum speed of the trailer on public roads is 30 km/h in
Poland (pursuant to Road Traffic Act of June 20th 1997, article 20). In the countries where
the trailer is used, the limits stipulated by the road traffic legislation in force in a given country
must be observed. The trailer speed must not, however, be greater than the maximum design
speed of 40 km/h.
8
3
0
0
X
0
1.4
SECTION 1

Advertisement

Table of Contents
loading

Table of Contents