1.4.1.4 SWF16 Rear Panel
No.
Name
1
Cooling fan
2
Debug port
eth0 Ethernet port
3
(Management Port)
eth1 Ethernet port
4
(
SAN Private Port)
User Guide
Figure 12: SWF16 back view
Description
Prevents the switch from overheating.
Connects to maintenance equipment.
This port is only for testing or debugging in
Accusys internally.
Controls web GUI of the SWF16.
The default IP is "192.168.0.25"
The port supports DNS, but its use is
not recommended.
When the network connection is
normal, the left LED would be
orange and the right LED would be
flashing green
Setup as a private port for MDC
The default IP is "192.168.1.25"
The port does not support DNS
function.
When the network connection is
normal, the left LED would be
orange and the right LED would be
flashing green.
1. Introduction
Page 1-12