Table of Contents
Advertisement
Note
If you connect ExaSAN storages, not created by webGUI steps, the "Apply"
button would NOT be shown on the bottom right.
Note
We strongly recommend you creating 2 or 4 arrays for each RAID controller to
build up your SAN volume to improve performance.
4.3 Download Log– "Event Management"
Log file provides very important clues to analyze problems, to the root cause level,
when problems are not obvious in a SAN environment. SWF16 web GUI provides a
function to download the log file of the SWF16
Step 1: To click "Event Management", then you'll find "Download" button in the middle
of the GUI (Figure 50).
User Guide
Figure 49: Creating arrays
4. How to Use
Page 4-7
Advertisement
Table of Contents
