What Else You Need; Figure 14 Eight Leds At The Top Edge Of The Hba - Accusys ExaSAN SWF16 User Manual

4 Access LED Indicator
Note
The eight LEDs at the top edge of the HBA indicate the connection
status of the HBA (The LED closest to the bracket (9
up.) If you have properly connected the HBA to the ExaSAN
PCIe2.0 RAID controller or switch, one set of 4 consecutive LEDs will
be constantly lit. The second set of 4 consecutive LEDs indicates
the type of PCIe connection - flashing LEDs indicate a PCIe1.1
connection, while steady LEDs indicate the desired PCIe2.0
connection. See Figure 12 below.

1.5 What Else You Need

ExaSAN software requires suitable hardware and accessories to fully take advantage of
this software. The following section covers all of the software and hardware which you
may need to purchase separately. Please inquire with your ExaSAN reseller for more
details.
Note
Accusys shall not be liable for products mistakenly purchased and/or
unsuitable use of ExaSAN components.
User Guide
Flashing blue indicates data is moving
through the switch.
No light indicates the host is not
accessing

Figure 14 eight LEDs at the top edge of the HBA

1. Introduction
) does not light
th
Page 1-16