Installing On Mac And Windows; Figure 28: Windows Installer Package - Accusys ExaSAN SWF16 User Manual

3.3.2.1 Installing on MAC and Windows

1. Insert the installation DVD into the DVD drive of the MAC or PC.
2. For Macs, unzip and execute "DVD-ROM/ExaSAN/For SAN/SWF16/Installer
package/Mac Installer/Accusys_IP_Mac_NT_x.x.x.zip ".
For PCs, unzip and execute "DVD-ROM/ExaSAN/For SAN/SWF16/Installer
package/Windows Installer/Accusys_IP_Mac_NT_x.x.x.zip".
Note
After you install the installer package completely, you'll see
"RAIDGuard X" icon in the host. "RAIDGuard X" is a powerful tool
which supports remote monitoring of multiple controllers that are
connected to the same network. If you want to configure your
storages in advance, you can use RAIDGuard X to do so. If you just
need the basic function to setup your storages, you can use
ExaSAN switch web GUI to do so. Please refer to the section "4.
Using ExaSAN switch web GUI". For detailed use of RAIDGuard X,
please refer to your storage's (A12S2-PS, B08S2-PS, etc...) user's
manual.
3. Follow the onscreen instructions. Sample screens shown below are from a Windows
installation.
User Guide

Figure 28: Windows installer Package

3. Installation
Page 3-8